Home | FAQ | Share Your Feedback | Contact Us | Sitemap | Français   Facebook
Facebook
Home | FAQ | Contact Us | Sitemap | Français   Facebook
Facebook
Home
About Us
What's new ?
Who we are
Commitment to quality
Community involvement
Products
White Cedar Shingles
Samples
Quote
Natural
Factory Coated Shingles
Victorian Series
Laths
By-products
100% Green
Photo Gallery
Technical Information
Calculator
Installation
Best Product
Material Safety Data Sheet
Warranties
MAIN CATEGORY
Dealers
FAQ
Share Your Feedback
Contact Us
Sitemap

Français
blank image blank image

Articles > Installation for home slicker sidewall application

Step 1.

Install sidewall sheathing material (OBS, Plywood, Foam Board, etc.) Over studs and apply house wrap or building paper per manufacture’s instructions.  Apply 5/4” trim around windows and doors or shim out other trim ¼” to allow for thickness or Home Slicker. Butt Home Sticker against window and door trim. Siding will be even with the trim.

Step 2.

Roll out Home Sticker whenever siding or cladding will be applied with channels running vertically. Do not stretch Home Sticker – It should lie flat against the wall.  Nail or staple every 3 square feet.

Step 3.

Butt edges of new rolls or new course toget6her – DO NOT overlap layers of Home Sticker. Cover entire wall surface where ever siding material will be installed.

Step 4.

Install siding or cladding system over wall surface per manufacturer’s installation instructions.  Allow ¼” for thickness of Home Slicker. Use only blunt-tipped, rings shark stainless steel nails for any wood cladding product.  DO NOT OVERNAIL.

*For wood siding, install siding per WRCLA or WWPA instructions.




Back to articles list